Skladem > 5 ks
ELEGOO Water Washable 8K Resin in Space Gray is a photopolymer material for LCD 3D printers, designed to cure under UV light with a wavelength of 405 nm. The 8K formula enables precise prints with well-defined details, and the hardness of the cured material—83–88 Shore D—helps preserve the model’s distinct shapes. The resin has a viscosity of 250–400 mPa·s at 25°C and allows for convenient washing of prints with water.
Formula 8K została opracowana do drukowania modeli wymagających dokładnego odwzorowania drobnych szczegółów, tekstur, krawędzi i zagłębień. Twardość utwardzonego materiału, wynosząca od 83 do 88 w skali Shore’a D, zapewnia sztywność modeli, które dobrze zachowują swój kształt. Dzięki temu żywica doskonale nadaje się do drukowania figurek, miniatur, dekoracji i innych projektów, w których kluczowa jest wyrazistość drobnych detali.
Eine Viskosität von 250–400 mPa·s bei 25 °C und eine Dichte von 1,05–1,25 g/cm³ des flüssigen Harzes definieren die Materialeigenschaften vor der Aushärtung. Die wasserabwaschbare Formel hingegen ermöglicht die Entfernung von Rückständen unausgehärteten Harzes von fertigen Modellen mit Wasser und reduziert dadurch den Bedarf an Isopropylalkohol beim standardmäßigen Abspülen.
⚠️ Translation language not specified.
ELEGOO Water Washable 8K is designed to work with light at a wavelength of 405 nm and is compatible with most LCD 3D printers that support this type of resin. To achieve the desired print quality, it is important to properly adjust settings such as exposure time for your specific printer model; the manufacturer provides dedicated resin settings on its website. Before use, the material must be thoroughly mixed according to the manufacturer’s instructions to ensure even pigment distribution.
| Výrobce | ELEGOO |
|---|---|
| Model | Lavable à l’eau 8K |
| Typ | Resina fotopolimérica |
| Barva | Vesmírně šedá |
| Vlnová délka | 405 нм |
| Tvrdost | 83–88 Shore D |
| 25°C-оос дахь зуурамтгай чанар | 250–400 mPa·s |
| 密度液体树脂 | 1.05–1.25 g/cm³ |
| Pevnost v ohybu | 52.47–64.13 mPa |
| Pevnost v tahu | 41.06–50.18 mPa |
| Tisková technologie | LCD |
| طريقة تنظيف الطباعة | с водой |
| Compatibility | la plupart des imprimantes 3D LCD qui prennent en charge les résines de 405 nm |
| Hmotnost | 1 kg |
Máte zkušenost s tímto zbožím? Pomozte ostatním při výběru..